Tanabedck20 build thread

[Tanabedck20]

Whats up guys wanted to share some pics of my build and trust me still more to come
let me knw what u guys think

Here's my old b18c5 setup
http://c1.ac-images.myspacecdn.com/images01/24/l_bb9ffbe5e109afc5b6e8c842d29aad68.jpg
like it for a while but realized that the setup i wanted to do would of cost me just as much as a k swap so i went all in on a k swap Got the motor from my homie Big Mike from Plan B motorsports

K20A Type S
http://c4.ac-images.myspacecdn.com/images02/129/l_b320bdcc034f4aa78ba47e1ef5448667.jpg

http://c4.ac-images.myspacecdn.com/images02/146/l_07c8ca3886e9401a9b856da20c24ac07.jpg

Already tapped Fan switch and thermo switch

http://c3.ac-images.myspacecdn.com/images02/142/l_954207ca4625445fb1c64c9ce167f916.jpg

And bye geos the Bseries

http://c2.ac-images.myspacecdn.com/images02/5/l_a070698e111a4764bf0a48573870b389.jpg

Here are most of the parts i collected getting ready for the swap

Walboro fuel pump

http://c4.ac-images.myspacecdn.com/images02/11/l_5d5ffe8d8f0a49cf892e92da6a056fe3.jpg

Aeromotive fuel pressure regulator

http://c1.ac-images.myspacecdn.com/images02/47/l_5ceef4a6df7945f295f0c7356df074b8.jpg

Here's the Dtr header but i wanted to do my own setup so i got the Skunk2 swap header
which u guys will see in a min.
http://c3.ac-images.myspacecdn.com/images02/24/l_4d7796f4c4ee4d96a3e918798438915a.jpg

Rbc

http://c4.ac-images.myspacecdn.com/images02/57/l_0faaae111b664f8c951c32bd6d22809f.jpg

Karcepts adapter For the Rbc

http://c1.ac-images.myspacecdn.com/images02/9/l_065beec5da76460c8b81d9d314c0a22c.jpg

Mugen ECU tray

http://c3.ac-images.myspacecdn.com/images02/41/l_3b5d343a27624a30955aef95665bb05a.jpg

Some of the Hybrid Racing Goodies love their Products man and my homie 2To's wire tuck harness he did for me Sub Harness,Clutch line,and tuck fuel kit setup

http://c4.ac-images.myspacecdn.com/images02/82/l_fb0f5f6871f34036a97130915938e053.jpg

Slim Fan and Koyo Radiator(Big mistake!Should of got the griffin but i found out about it later :(

http://c1.ac-images.myspacecdn.com/images02/83/l_5919288ba0aa445cb8cff5d90a273864.jpg


http://c4.ac-images.myspacecdn.com/images02/93/l_8645e7480e2c41339e67cff67cac115f.jpg

Well finally the day came and i sent my car to my homies spot so we can take care of the swap there!!

http://c4.ac-images.myspacecdn.com/images02/69/l_1f800299d0694919a4961b2aba5109a7.jpg

After two days of progress

http://c4.ac-images.myspacecdn.com/images02/92/l_7a0bc2f32a3e47759bb6adc8f88f9e87.jpg

And after a week of waiting for the thing to start it finally did man and it was well worth the money build sweat and cuts hahah
http://c3.ac-images.myspacecdn.com/images02/104/l_173d1be50463448f972d6a5394a05b2a.jpg

heres the parts list

K 20a engine
Twoto wire tucked harness

Aeromotive fuel pressure regulator
B & m fuel pressure gauge
Walboro fuel pump
Hybrid racing tuck fuel line kit with russell fuel filter
Hybrid racing sub harness
Hybrid racing clutch line
Hasport motor mounts
Hasport axles
Karcepts shift box
Karcepts rbc throttle body adapter
Karcepts intake
Koyo radiator for dc5
K20r ecu
Mugen ecu tray
Samco hoses
Oem header gasket
Oem radiator clamps
Oem charge harness
Oem ngk sparkplugs
Oem shifter cables
Rbc manifold
Rbc throttle cable
Odysessy battery
Password jdm battery tie down
Skunk2 4-2-1 header blin blin


more to come guys this is just the mock up we are gonna respray the bay and tuck the brakelines and adding more Hybrid racing goodies and here's alittle preview of whats to come

http://c3.ac-images.myspacecdn.com/images02/77/l_3912baa578eb49fea132a78e9d842616.jpg

mugen certified! :eek:

[DCacosta]

how u like the new setup compared to ur old itr motor?

[OneOGHonda]

Nice! More pix?

[Tanabedck20]

Its way more torque man its way better than my b18c5 but I still need the hondata to get the full potential out of it and I started it today smelled a little radiator fluid out the exhaust so I might need to change the head gasket but I will post more pics soon guy gotta start stripping it down to get the body work done and If I have to do the head gasket fuck it new head components in there as well hahah
how u like the new setup compared to ur old itr motor?

[DCacosta]

keep this thread updated

[TypeOne]

Its way more torque man its way better than my b18c5 but I still need the hondata to get the full potential out of it and I started it today smelled a little radiator fluid out the exhaust so I might need to change the head gasket but I will post more pics soon guy gotta start stripping it down to get the body work done and If I have to do the head gasket fuck it new head components in there as well hahah

What is the compression?

Do you know where the engine came from? It looked like it had some mods on it already...

Very nice looking setup!

[JDMEK4COUPE]

Mugen Stuff... I like it...

[Tanabedck20]

Id don't knw yet the motor came out of my homie plan b mikes eg out in cali it had ur basic bolt ons but nothing serious on it and I should of changed it right when I got it.

What is the compression?

Do you know where the engine came from? It looked like it had some mods on it already...

Very nice looking setup!

[Tanabedck20]

Found the problem the heater hose connected to the firewall is leaking coolant all over the header :(

[Civik24]

man that is my next project type r with a K

looks good man

[Tanabedck20]

hahah hell yeah!!!:D:D

man that is my next project type r with a K

looks good man

[JDMEK4COUPE]

Any Updates?

[Tanabedck20]

Yes sir finally finish up i took mad pics i will start posting later on in the week man been mad Bizzy with work:( But here's some pics to hold u guys hahah ;p

Ok guys let the pics begin start off with the new suspension setup so far.

Spoon N1 dampers 13k Front 11k rear
Function7 LCA's
Buddyclub Front and Rear Camber Kits

http://c1.ac-images.myspacecdn.com/images02/113/l_92f08f039ce34913a97ad903878e9e4c.jpg

I got the swift spring setup cuz i drive it daily but might be getting the buddyclub upper pillar ball mounts added in......

Thanks to mike and greg from Jdm speedworx for the i'llest parts ever.. .....oh Here's a little preivew to till monday.....

Top One Aero Front splitter with winglets molded made for my USDM Front

http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs426.snc3/24580_1390765257737_1490300955_1005093_645950_n.jp g

Side View
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs446.ash1/24580_1390764697723_1490300955_1005092_1106955_n.j pg

So Usdm Front guys unite hahaha they finally got some stuff for our fronts that aren't fake spoon lips hahaha Thanks Jc for the Bomb Hook up waiting on the full Setup Side splitter rear diffuser woooo!!!!!

[ProEG]

nice ride man i love the yellow. i would love to have a yellow hatch

[Tanabedck20]

Thanks homiee me and my homies teying hard to get thing ready for I so hopefully. We make it this to I.A. this year already booked our hotel no going back now!!

[Tanabedck20]

Update guys sneek peek

http://c1.ac-images.myspacecdn.com/images02/71/l_bbcfa2630dee49ce8ee93fec0d9bb784.jpg

[TypeOne]

Thanks homiee me and my homies teying hard to get thing ready for I so hopefully. We make it this to I.A. this year already booked our hotel no going back now!!


Yeaaaaaaa

Stop by the booth and hang out!!!

:D

[vtec5500]

looking good man!!

[JDMEK4COUPE]

Update guys sneek peek

http://c1.ac-images.myspacecdn.com/images02/71/l_bbcfa2630dee49ce8ee93fec0d9bb784.jpg

BUMMMMMMMPPPPPPPPPPPPP!!!!!

Like It!!!:D

[Tanabedck20]

Ofcourse man will be there with my homie just tell where to bring the henny update coming later toninght.
Yeaaaaaaa

Stop by the booth and hang out!!!

:D

[TypeOne]

Ahahahahah

Bring it to Eibach too.. we'll see you there... right? I think Mike said that you were going... or was that to IA?

[Tanabedck20]

Yea I was gonna head out there but its the same week as myl, sons bday so IA is the firast show the car will be attending more updates tomorow

[Tanabedck20]

Update!!!!!!!!!
Here's a couple of update guys This is the paint we will be using to pait the R it will Be PY outside and Battle ship Grey Guts and Engine Bay thanks to my homie jeff out in seattle for hooking it up with the paint.

http://c4.ac-images.myspacecdn.com/images02/79/l_5bd1d370954d4522bbfd029551f250b3.jpg

Little Thing here and there for the engine Bay have been coming in and my Favorite Piece of my interior arrived the other day too!!!

Arc Vc Insert

http://c2.ac-images.myspacecdn.com/images02/142/l_e2ddc20cee0340acbe35a92227555db1.jpg

Carbing Resi for the radiator Fluid

http://c4.ac-images.myspacecdn.com/images02/132/l_8f9317c184594cb6a09a990f410b3a1f.jpg

Chase Bays Fuel Kit FTW!!! I didn't it was this nice but i came in and looks great cant wait to install man gotta get the harness and Brake tuck kit and the MC delete kit Thanks again to chase for all his help !!

http://c2.ac-images.myspacecdn.com/images02/147/l_6388bc50b26f475a8611f2284ee35391.jpg

And my Homie Derek at All in Fab man made me the sickest one off intake ever man and the price was more the sweet for a 3" intake with a Velocity Stack with internal Filter and V band man this came out sick as Fuck .

Raw Fresh off the Table hahah ;p

http://c4.ac-images.myspacecdn.com/images02/144/l_f974372c1d714c7681d59a311b96f673.jpg

Then Polished woooo!!!!!

http://c1.ac-images.myspacecdn.com/images02/125/l_8c193dde070c487087fd97fa6466fb5c.jpg

And last but not least my Baby hahahahah Mugen FG360 the piece that completes my interior......yea right hahaha ;p

http://c2.ac-images.myspacecdn.com/images02/137/l_9808e64b4a0f4d3ba609e424085a44cd.jpg

haha guys this should do it for this week guys gonna post pic on saturday of the tear down we already have the front suspension off and half of the interior done so let me kmnw what u guys think man ;)

[t.schultz]

Nice!!!

Parts are looking good!

[Tanabedck20]

Nice!!!

Parts are looking good!

Thanks homie!!!

[TypeOne]

Weerrrrrrdddd!!!!

Loooking great bro

[Tanabedck20]

Hahaha don't forget Monday hit u up for the mounts daveWeerrrrrrdddd!!!!

Loooking great bro

[Bonb]

This looks like its going to b an awesome build!!Keep it up!

[TypeOne]

hahaha Bon.. making an appearance!

[Bonb]

LOL...I check here daily.

[Tanabedck20]

This looks like its going to b an awesome build!!Keep it up!

Oh shit Bonb whats good pimping hahaha :cool:

Update

Ok guys Been working hard on the car me and my homie been working on the strip down and prep for paint cuz my buddy jeff is coming to spray her down 3 week of June so we gotta go on overdrive mode now.And sorry some of the pics are shitty cuz my camera died but i bought a hi res joint so it should be here son enough.

here we go

As of right now the K is out of the car we removed every thing that we could cuz it was a long friday and saturday morning.
We took the motro out in like 45 mins cuz i reletively unplugged everything that was attached to the K.
http://c3.ac-images.myspacecdn.com/images02/129/l_693b7376fa6649c88a5e24759cfa30f2.jpg

From there while my boy was taking out all the mounts and bolts bracket and the steering rack cuz were changing to an eg joint. Me and my homie josh took out the dash and interior panel that we could without breaking shit that we are gonna put back cant decide whether to go fully gutted or full interior but time will tell.After we spray the interior Battleship grey we will knw.

http://c2.ac-images.myspacecdn.com/images02/136/l_0d839b760b44412a83ffcf660a061549.jpg
Again sorry for the Baby pics...

Heres the K just chilling again waiting for its time to crank again.

http://c3.ac-images.myspacecdn.com/images02/113/l_d39109c5c5a246ec9dcb8497e36f952e.jpg

Here are some of the parts that arrived while i was out at work and some of the pieces we are gonna be using HOPEFULLY BY I.A.

So I got my chase bays clutch line in this week and just finished ordering the master cylinder delete.That should arrive later on this week.So just missing the brake line tuck kit and were good !!!Thanks to chase for hooking uo a homie with these quality parts man.

http://c3.ac-images.myspacecdn.com/images02/146/l_2dbec9b1129a477cb4df8ecb2e241cf2.jpg

And Drum Roll Please FROM THE BIG HOMIE DEREK AT ALL IN FAB he sent me a prototype pic of his new line of manifolds he will be releasing!!!and guess whos first in line for the KJOINT!!!hahah and we will be copping the tucked Radiator aswell...

http://c2.ac-images.myspacecdn.com/images02/113/l_fda674076f9a427b97e7fd633928e5ad.jpg

The opening.
http://c3.ac-images.myspacecdn.com/images02/124/l_2d650ce4260e4c0fb768b6dde9153bca.jpg

And he also makes the spacer for those that are gonna be runing the s2000 master cylinder as i am..

Here are some pieces i copped from my sponsor Top ONE AERO

Plate
http://c4.ac-images.myspacecdn.com/images02/119/l_5e014cefa65746dc835fcbdbd4d7d9cf.jpg

here how the front splitter look on the USDM with ITR lip Guys (Test fitting)
http://c4.ac-images.myspacecdn.com/images02/150/l_8a56a1aaec8d493b91e99722d4769b5b.jpg

Side Skirt Splitters

http://c4.ac-images.myspacecdn.com/images02/122/l_dbe0507cc97b4b96932da7392dfc053b.jpg

Diffuser im just waiting for this to arrive

http://c4.ac-images.myspacecdn.com/images02/115/l_ff6f8884d9b94c1da6183086bb6c5713.jpg

And some of the parts that will be shipped out to HeyMikee from Dipped parts.com

Already shipped out the VC shipped out these to be Color Chromed matched with the Vc Candy Cobalt Blue as well as the Mugen Center Caps(not shown in pic)

http://c3.ac-images.myspacecdn.com/images02/131/l_c1452605ee9f492a98180390f8e3b8ce.jpg

and the last Few things are coming from the homies at Hybrid Thanks David

Ordered the motor mounts already Blacked out with the green bushings:D
And ordering the shifter cables monday or tuesday when their open cuz of holiday week end..Thats its for this week guys thanks for looking at the thread and for the kind words homies its almost time for I.A> wooooo!!!!!!!

[Bonb]

Oh shit Bonb whats good pimping hahaha :cool:


Not much...jus drooling over ur build thread man...u pretty much are doin my dream build.lol..i jus got my topone diffuser...shits dope.cant really install it til I get my support rods.and as for all the hybrid stuff...man ur gonna love it.

[Tanabedck20]

Not much...jus drooling over ur build thread man...u pretty much are doin my dream build.lol..i jus got my topone diffuser...shits dope.cant really install it til I get my support rods.and as for all the hybrid stuff...man ur gonna love it.

hahah hell yeah man i love all my Top One Components and my favorite pieces have to be the Hybrid parts man there clean and functional all i need man I ordered My shifter Cables and Shift Box and waiting on chase to send out my MC delete kit But in the mean time i got my S2000 Cm today..

http://c3.ac-images.myspacecdn.com/images02/136/l_5cd2dc0c079247048025b4f065fdf622.jpg

And my Mugen Gen1 arrives tomorow!!!!wooot woott from my Sponsors At JDM Speedworx!!!:eek:

[JDMEK4COUPE]

hahah hell yeah man i love all my Top One Components and my favorite pieces have to be the Hybrid parts man there clean and functional all i need man I ordered My shifter Cables and Shift Box and waiting on chase to send out my MC delete kit But in the mean time i got my S2000 Cm today..

http://c3.ac-images.myspacecdn.com/images02/136/l_5cd2dc0c079247048025b4f065fdf622.jpg

And my Mugen Gen1 arrives tomorow!!!!wooot woott from my Sponsors At JDM Speedworx!!!:eek:

Nice Work! Good Parts! Looking Great Buddy!