Konerri's DC Build

[konerri]

William from HR ask me to post up my car so here goes.

The original thread from start to current: can be found here
http://www.clubintegra.com/board/showthread.php?t=11495

But here is a quick summary of everything. So far 2 years and still not done. Car is currently in it's second phase. Car is being built as a good street car and at the same time can still pulled respectable times at the Track. Idea for the car is not to have it over done but just right.

Bought the car as a '99 DC4 with a damaged front end. So first mods was a OEM JDM HID front Conversion.

http://aycu06.webshots.com/image/5765/2003303402115569352_rs.jpg (http://allyoucanupload.webshots.com/v/2003303402115569352)

http://aycu09.webshots.com/image/4288/2003327453885057483_rs.jpg (http://allyoucanupload.webshots.com/v/2003327453885057483)

Then the PIC Selects(10fF 8R) and LCA came in.
http://img228.imageshack.us/img228/9796/slammedday4yw6.jpg

Then is was Beaks everything out back, 23 Rear Sway, Blox end links. Rota C10's with Kics project R40 lugs.
http://img215.imageshack.us/img215/1162/hpim2616aoz5.jpg


Brembo Rotors all around
http://img264.imageshack.us/img264/4930/0612072103vf3.jpg (http://imageshack.us)

JDM window visors. ITR Spoiler back on.
http://img514.imageshack.us/img514/7248/0612072105wp3.jpg (http://imageshack.us)

bought a bunch of accessories.
http://aycu22.webshots.com/image/30021/2004264317327266333_rs.jpg

Then i saw some real mugen mirror faced MF10's in real life and decided to do it to my C10's
http://aycu25.webshots.com/image/32704/2003016397028121593_rs.jpg
http://aycu22.webshots.com/image/32461/2003881580606988440_rs.jpg

Well this was the car at its prime during phase one of its life. I went on Vacation and my brother's took all of my parts off my car and stuck them on his civic. It later was stolen and stripped down in Houston, TX. It had my rims, leather seats, calipers, rotors, rims, my LS-Vtec. So now the car is nothing and i must start over.

last picture of my parts on my brother car before it was stolen
http://img.asiantown.net/members/14472/dosequisXX.jpg


Phase two will be a completer overhaul-change over. I am doing it big this time and build it perfect this time.

http://aycu04.webshots.com/image/44603/2004133894924181714_rs.jpg

Started build K-series parts.
http://aycu09.webshots.com/image/45008/2006207642681100004_rs.jpg

my customer 3in intake ending with a BPI Flow Stack
http://aycu09.webshots.com/image/45648/2000925885946308288_rs.jpg

During the whole time the integra was down i bought an '01 S2000. it was aight then i gave it to my brother who lost his civic.

Then i bought this. A piece I've been looking for for a long time.
http://img294.imageshack.us/img294/2920/0614081302xv4.jpg

Then i needed some bling bling
http://img244.imageshack.us/img244/9411/dsc07015qx9.jpg

I never liked the all red tail lights so i got these
http://img147.imageshack.us/img147/5188/dsc07973hm8.jpg

My rims finally came in after 6 months of back orders
http://img390.imageshack.us/img390/5299/dsc07984qr7.jpg

Don't forget about the tires and mugen accessories
http://img131.imageshack.us/img131/8889/dsc08658ce4.jpg.

Then JDM ITR 5-lug conversion
http://img520.imageshack.us/img520/415/dsc09056wl3.jpg

A car rebuild requires new carpet.
http://img12.imageshack.us/img12/9366/dsc00658aeo4.jpg

My race harness.
http://img6.imageshack.us/img6/359/dsc00668abn3.jpg

more engine stuff
http://img261.imageshack.us/img261/5928/dsc00673acv7.jpg

my steering wheel and ktuned ac-ps relocation kit.
http://img520.imageshack.us/img520/5493/dsc00772a.jpg

my new track pads.
http://img7.imageshack.us/img7/9107/dsc01698u.jpg

Time for some paint.

Before paint....just trying to take everything out. And Yes i am painting it myserlf. Well not exactly, my brother who graduated from UTI is painting it for me. And yes, we are doing it in our garage. And yes, if you haven't noticed, this car has been built by me and my brother's, no shops involvement. At least not yet.

http://img26.imageshack.us/img26/1772/rearrightshot.jpg

Things i still need to get but progess is coming along slowing since this is a personally funded car.

Interior:
2x Mugen S1r seats
2. Mugen S1r rails
Mugen rear view mirror cover
s2000 start button for an integra
Works bell quick release and adapter
Sparco harness bar.
Some essential gauges
Get s2000 cluster project finished and working.
Some custom carpet work for the trunk area by me.

Exterior:
Spoon lower tie bar
Stop-tech Oem Sized Aero-rotors Front and Back with Zinc coating.
Spoon calipers-pending income.
Some how, make a J's racing ram air duct for the driver side.
Some how make a diffuser for the back.
Some how make a front splitter.
Oh yeah and paint the car NEW FORMULA RED(NFR)

Engine Bay:
JDM K20A swap
Exedy street stage 1 clutch and 8.7 ib flywheel.
All the adapter things from hybid-racing.com
Full size metal Hybrid racing radiator.
DRIVE SHAFT SHOP road racing axles
RCrew race header
T1R 70mm header back exhaust system
Hondata Kpro
Re-run all brake lines because of a full wire tuck. Still want to keep ABS.
Trying to find an electric motor to power the power steering system.

[konerri]

Been slacking a little since it's vacation time. now it's a little behind schedule but still hopefully finish by saturday because i have an AutoX event on Sunday. So far ever day was just buying this and forgetting that. So go back out and buy that again. Finally got most of the things we needed.

The three amigos working on the car. Kong(me) trying to figure out where this clamp goes. My second youngest brother, Xay AKA "The TECH", using the high speed sander. My youngest brother, Houa AKA "The body man", doing some final checks before welding.
http://img16.imageshack.us/img16/7633/dsc01986thx.jpg

Houa, welding the front end
http://img16.imageshack.us/img16/796/dsc01968z.jpg

Interior almost ready for paint, just need to scoff it a little more.
http://img17.imageshack.us/img17/6386/dsc02018s.jpg

Green circles are where the dents need to be pulled out. Houa did painless dent removal(PDR). NO Bondo where it's not needed.
http://img249.imageshack.us/img249/7002/dsc02023.jpg


The paint and paint supplies. Could of bought a new set of RPF1's with this.
http://img11.imageshack.us/img11/5831/dsc01999r.jpg

http://img9.imageshack.us/img9/6241/dsc02001i.jpg

F**K U passenger side mount!!!
http://img14.imageshack.us/img14/2457/dsc02034k.jpg
grinding down studs on the fire wall for that clean look.
http://img7.imageshack.us/img7/7774/dsc02045j.jpg

And my cousin was there for moral support and beer. And i had to buy the Lincoln Electric Welder too.
http://img25.imageshack.us/img25/4395/dsc01959y.jpg

Also have a parts update.

8 more Skunk2 Extrended studs came in yesterday because i only bought 16 originally when i still had 16 lugs. Now i have 20 and need 4 more. It's a bitch trying to just by 4 because it's like the same price as buying 8 so i bought 8.

Also got the Skunk2 Pro-series + front camber kit. Yes, i already have the T1R front camber one but they still had to use the OEM bushings which are all f*ck up. So Since the Sk2 came with newer and better ones, i decided to get them.


Houa teaching me how to mix paint.
http://img207.imageshack.us/img207/9173/dsc02374.jpg

HONDA NEW FORMUILA RED(NFR) it's much redder in real life. The camera some how took slightly oranger red.
http://img527.imageshack.us/img527/6115/dsc02379.jpg

this is just the base coats. No clears yet.
http://img87.imageshack.us/img87/375/dsc02380.jpg
http://img407.imageshack.us/img407/5323/dsc02429n.jpg
http://img402.imageshack.us/img402/1787/dsc02432x.jpg
http://img294.imageshack.us/img294/7805/dsc02435.jpg

Testing out how the wheels will contrast with new color. I seem to like it very much. mucho much.
http://img91.imageshack.us/img91/1558/dsc02450.jpg

[TypeOne]

MMMMMMM looks good!

I was going to say the NFR looks a bit orange-ish in the pics. But it's still a nice color!

Keep up the good work!!

-David

[hybridracing]

Nice thanks for dropping in.. so is this how the car currently sits?

[shivadadon16]

looking real good damn nice build keep it up

[konerri]

MMMMMMM looks good!

I was going to say the NFR looks a bit orange-ish in the pics. But it's still a nice color!

Keep up the good work!!

-David

Pictures were taken at night with a halogen work lights providing lighting. These lights are kinda yellow themselves so the red kinda of turned out orange. In real sunlight, the red is much reder. Car currently sits like this. Still working the bumpers and other little things that also need to be sprayed.

[TypeOne]

Pictures were taken at night with a halogen work lights providing lighting. These lights are kinda yellow themselves so the red kinda of turned out orange. In real sunlight, the red is much reder. Car currently sits like this. Still working the bumpers and other little things that also need to be sprayed.

Excellent. Keep us posted.

[JDMEK4COUPE]

any updates here?

[JDMEK4COUPE]

Good stuff...

[konerri]

haven't been on here in a while. A friend was takin to me about the quality of cars on here and he said i had to post my car up. I told him, my car is already on there. But i haven't updated in like 2 years.

So here is an update.

All Kseries engine related parts are SOLD. i know the Kseries is a better engine in some aspects but the F20 in better in other aspects like 9K RPM from the factory. Also, loving the sound of this engine over the kseries. Don't get me wrong, still love the Kseries and marvel it. Not here to battle just here to share.

Taking this engine.

http://img251.imageshack.us/img251/6315/f20cprepaintvalvecovers.jpg

F20C...yeap that's right.

has a closed deck sleeve job done.
BC rods
CP pistons 9.0 :1
titanium dual valve springs
ARP head studs.
Basically, everthing is redone.

Putting it on a '06 RSX transmission and putting it in my car.
Then turbo chargering it with most likely a Garret GT3071R.
400 whp is more then enough for me.


http://img69.imageshack.us/img69/8430/installteaser.jpg

http://img5.imageshack.us/img5/7624/enginetestfit.jpg

My money shot.

http://img580.imageshack.us/img580/5257/frontshotinstalled.jpg


As you can see there is plenty of space for a turbo setup. OHHH YEAAAHHHHHH :D

Although the parts have changed, the builds theme is still the same. A great street car and decent track car.

[casesofcoke]

Nice!
Have a great day!-Casey

[hybridracing]

Looking good!

What are you doing for wiring?

[amimaxima]

looking good

[TypeOne]

Seems like you could have got a K20A2 to make 400whp and some change with no problem.

In any case, the car looks great and I'm really interested to see how it comes together!

[konerri]

^true. thought about that too. If you look @ my original parts list...it included a STOCK JDM K20A. People would ask "why spend that much money when the A2 could do the same with just a thinner head gasket and cams" i wanted something special like a collectors item. I am into playing cards...rare is special.

When i noticed that there was just alot of JDM k20A's Integras out there, i wanted something else.
My brother convinced me to do this build. At first it was just all motor f20c. Then we decided to do turbo too to make it special. All the F2K swaps i know of are NA.

[t.schultz]

That looks sooo sick!