View Full Version : 1998 Acura Integra 4dr sedan, Hybrid Racing action packed!
PANDAhatch
03-28-2009, 08:46 AM
Hey guys, this is my build of my '98 Acura Integra 4dr, as seen on the home page of Hybrid Racing, brought to you by of course Hybrid Racing as well as STATUS seats, ACT, Seibon, K-Tuned, Dunlop, Valvoline, Suja1/PIC, Karcepts, and Chasebays. The car is having a complete rotisserie ground up build/restoration, no surface will be left untouched, EVERY fastener and grommet will be replaced, just make sure you stay tuned for the entire build as well as some revolutionary parts that will be featured on this build that will have a big industry impact. Anyway, ON TO THE PICS!
The car has more progress on it, but I need to upload the pictures which will happen tomorrow, hopefully paint will be in the near future!
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/_MG_6870.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/_MG_6881.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/_MG_6875.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/_MG_6878.jpg
PANDAhatch
03-28-2009, 08:49 AM
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/_MG_6897.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/_MG_6896.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/_MG_6914.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/_MG_6911.jpg
PANDAhatch
03-28-2009, 08:50 AM
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/_MG_6908.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/_MG_6906.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Dry3.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Dry9.jpg
PANDAhatch
03-28-2009, 08:51 AM
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Dry19.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Dry13.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Dry14.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Shave9.jpg
PANDAhatch
03-28-2009, 08:52 AM
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Shave5.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Shave3.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Progress8.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Progress6.jpg
PANDAhatch
03-28-2009, 08:53 AM
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Hybrid9.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Hybrid7.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Hybrid5.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Hybrid19.jpg
PANDAhatch
03-28-2009, 08:55 AM
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Hybrid6.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Clutch10.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Clutch2.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Clutch6.jpg
PANDAhatch
03-28-2009, 08:56 AM
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Bay6.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Bay7.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Bay12.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Shaved27.jpg
PANDAhatch
03-28-2009, 08:57 AM
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/RS2.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Finished5.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/A17.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/A15.jpg
PANDAhatch
03-28-2009, 08:59 AM
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/A4.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/A6.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Kar5.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Kar7.jpg
PANDAhatch
03-28-2009, 09:00 AM
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/BAYYY4.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Dec4.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Dec5.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Dec2.jpg
PANDAhatch
03-28-2009, 09:01 AM
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Roof.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Roof2-1.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Roof6-1.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Roof5-1.jpg
PANDAhatch
03-28-2009, 09:02 AM
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Top2.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/PedalSetup.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Flake4.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Flake3.jpg
K24el
03-30-2009, 12:43 PM
This is going to be one nice Teg. Nice progress
mr.coupe
03-31-2009, 02:07 AM
heyyyy buddy :)
TypeOne
03-31-2009, 03:51 AM
Looks like an awesome build so far.
PANDAhatch
04-03-2009, 04:01 PM
Full ChaseBays MIL Spec harness, Tefzel wire, Raychem DR-25, Raychem breakouts, Amphenol connector, this is the top of the line, top notch harness, it's even better in person than I could imagine. I told Chase how I wanted the wiring ran and he came through exactly how I pictured. I still need to get Adel clamps to hold the harness close to the engine, but you get the idea... Pictures do not do this harness justice!
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Harness3.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Harness1.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Harness2.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Harness9.jpg
PANDAhatch
04-03-2009, 04:03 PM
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Harness8.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Harness7.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Harness6.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Harness4.jpg
PANDAhatch
04-03-2009, 04:03 PM
http://img.photobucket.com/albums/v498/FrescoGreenEG6/DB8/Harness5.jpg
HybridRacingTunr
04-04-2009, 06:51 AM
Very nice build and a thumbs up to Chasebays for the sickness of the harness. Keep on coming with the progress and pictures.
Parker
K24el
04-05-2009, 03:31 PM
nice very clean
PANDAhatch
04-08-2009, 09:40 PM
Well I pushed the car outside today to do some garage cleaning and to snap a few shots. the passenger side body work is just about wrapped up for now, it's been blocked 3 times and is ready for a finish primer and sealer, the driver side is in process now, should be done in the next day or two. If you ask, where the hell is the cage? Well, most of it is being made outside the car since the roof still isn't on yet, this allows for full weld penetration on EVERY angle and piece, as well as some trick one off stuff that is in store. Here are a few pics for now guys!
http://img.photobucket.com/albums/v498/FrescoGreenEG6/Outside1.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/Outside2.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/Outside3.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/Outside4.jpg
PANDAhatch
04-08-2009, 09:40 PM
http://img.photobucket.com/albums/v498/FrescoGreenEG6/Outside5.jpg
http://img.photobucket.com/albums/v498/FrescoGreenEG6/Outside6.jpg
shawnb
04-10-2009, 01:55 PM
wow! what a build.... it will be done all correct and should be one damn nice car... thumbs up all the way on this
TypeOne
04-10-2009, 09:57 PM
Looking good bro, I'm waiting to see some color on it.
hybridracing
05-22-2009, 02:34 AM
How are things coming along!
PANDAhatch
05-25-2009, 09:26 AM
Coming along, I just moved into a new shop out of my garage at my house, sooooo I have more room, more capabilities, and hopefully can get progress moving faster. I'm getting my daily driver finished and on the road, after that, I'll be pressing hard on the Teg. A lot more of one-off custom fab'd and machined parts are being made as well, more on that soon!
specr
05-31-2009, 07:40 PM
what is all that dry ice for????
PANDAhatch
06-02-2009, 08:29 AM
To remove all the sound dampening material
hybridracing
07-11-2009, 09:12 PM
Pics of shifter install :)
Arm&Hammer
08-04-2009, 05:11 AM
Sick build.
More pics. lol.
Are you gonna go with a jdm front?
JDMEK4COUPE
08-19-2009, 12:10 AM
I think yes because he remove the radiator suport.
JDMEK4COUPE
08-19-2009, 12:11 AM
that's a extreme build up! AWESOME WORK!
JDMEK4COUPE
08-19-2009, 12:11 AM
Any updates?
cdylanhr
02-19-2012, 03:04 PM
Anyone know what happen to this build?
vBulletin® v3.8.4, Copyright ©2000-2012, Jelsoft Enterprises Ltd.