my 20009 Project: K24 DC2

[toyoter91]

I am getting rid of my 2003 Z and going to be driving this around once i can drive it.

1994 Integra GSR. Bought it as a roller for $1200

Plans (right now):

12.0:1 K24 Engine
Type S Trans with LSD
Wheels and tires (woooo for cheap tires again)
Koni Yellows with Ground Control Coil overs
ITR rear swaybar.


Future (later this year):
Slowly swap out the interior for either brand new shit or ITR shit.
Maybe if i have time and money repaint it to Champ White.
Few other things here and there to get it looking better again.

On with the pics.

Here is the roller on the trailer on the way home.
http://www.wermskates.com/uploaderv6/files/5/1232845684301%281%29.jpg

K20A2 Long block and trans.

http://www.wermskates.com/uploaderv6/files/5/Image018.jpg

K20 Bare block after the tear down.

http://www.wermskates.com/uploaderv6/files/5/Image019.jpg

All the parts bagged, tagged and boxed for later use.

http://www.wermskates.com/uploaderv6/files/5/Image020.jpg

[toyoter91]

http://www.wermskates.com/uploaderv6/files/5/Image022.jpg
http://www.wermskates.com/uploaderv6/files/5/Image023.jpg

The K20 PRB Cylinder head, pretty much the only reason I picked up this long block and trans combo.

http://www.wermskates.com/uploaderv6/files/5/Image025.jpg

K20A2 Crank.
http://www.wermskates.com/uploaderv6/files/5/Image026.jpg

I will post more pics as the project progresses.

[toyoter91]

Well over the weekend I tore down my K24 long block so I could take it to get a bore and hone done as my pistons showed up last week. Here are some pics from that:

http://discodordon.com/uploader/files/1/IMG00030-20090227-1739.jpg
http://discodordon.com/uploader/files/1/IMG00031-20090227-1740.jpg
http://discodordon.com/uploader/files/1/IMG00032-20090227-1805.jpg
http://discodordon.com/uploader/files/1/IMG00033-20090227-1827.jpg

[toyoter91]

http://discodordon.com/uploader/files/1/IMG00034-20090227-1900.jpg
http://discodordon.com/uploader/files/1/IMG00035-20090227-1900.jpg



http://www.h8mylife.com/mainshaft/block.jpg
The block and girdle have now been cleaned, inspected, and are ready to go out for machining.

[toyoter91]

I also decided to start ripping out the insides of the car. The interior was much like you would expect a 1994 honda to be.... damn near falling apart. I plan to replace almost all of it with brand new oem stuff as time and money permits. Till then I will just be rolling stripped lol.

http://discodordon.com/uploader/files/1/IMG00039-20090228-1400.jpg
http://discodordon.com/uploader/files/1/IMG00040-20090228-1400.jpg
http://discodordon.com/uploader/files/1/IMG00041-20090228-1401.jpg
http://discodordon.com/uploader/files/1/IMG00042-20090228-1401.jpg

[toyoter91]

http://discodordon.com/uploader/files/1/IMG00043-20090228-1401.jpg
http://discodordon.com/uploader/files/1/IMG00044-20090228-1402.jpg
http://discodordon.com/uploader/files/1/IMG00045-20090228-1412.jpg
http://discodordon.com/uploader/files/1/IMG00046-20090228-1428.jpg

[toyoter91]

http://discodordon.com/uploader/files/1/IMG00047-20090228-1520.jpg
http://discodordon.com/uploader/files/1/IMG00049-20090228-1521.jpg

Also, a few of my swap parts and engine parts are starting to come in.

http://discodordon.com/uploader/files/1/IMG00050-20090228-1537.jpg
http://discodordon.com/uploader/files/1/IMG00004-20090220-1910.jpg

[toyoter91]

http://discodordon.com/uploader/files/1/IMG00005-20090220-1910.jpg
http://discodordon.com/uploader/files/1/IMG00060-20090304-1402.jpg

My mounts showed up about a week or so ago, but I am still waiting on some head work, cams, and my block to be finished with the bore and hone.

[hybridracing]

What a steal on the chassis! Keep us updated this ones looking good.

[TypeOne]

More pictures!!!

[toyoter91]

What a steal on the chassis! Keep us updated this ones looking good.

Thanks.

Will do my best.

More pictures!!!

as soon as i have something to take pictures of i will. haha,

the past few weekends have been spent working on other cars. plus still waiting for the hone to be done on the block

[toyoter91]

I finally had a chance to work on the car a little bit this weekend.

I spent about an hour cleaning out the inside a little more.

http://discodordon.com/uploader/files/1/integra3.jpeg

Sadly that is all the updates I have. Still waiting on a few things before some major updates can take place.

[hybridracing]

Still looks good what are your plans for the inside?

[toyoter91]

Still looks good what are your plans for the inside?

Stock usdm itr stuff over time. I really want to paint it, but I gotta get it running as soon as I can. Hope to have it running within the next few weeks as long as I have time to work on it.

The end goal is to have a champ white car that looks like a type r with a sun roof. Just with a little more power than normal ;)

[coolhandluke]

You are well on your way to meeting your planned ETA. Goodluck and I look forward to updates about the car.

[toyoter91]

Soooooo I figured it was time I updated this thread a little bit.

So far I have cleaned out all the dirt I found under the interior panels, and did the first stage of sound deadening. I figured I will keep it this way till after I get the car running. Once its running I will use the extra materials to hit the trouble spots. Considering its going to be running no cat, and 3inch exhaust I might as well make some attempts to make it civilized enough to drive everyday.

All my “swap” parts have come in, most of my fuel and engine parts have come in as well. My ecu was just sent to Hondata to get the Kpro installed. Huge thanks to Will over at Hybrid, and Jeff over at Go-Power for helping me out on a bunch of stuff for this project. Great guys to work with. I would thank Robby and Doug over at BluePrint, but that would be thanking my self and BigWorm85 so I will not do such things.... oh wait....

Next on my list to purchase is a set of wheels (yuuup knock offs for now qqqqqq), tires, ground controls, koni yells, and carpet, then a couple decent recliner race style seats, either looking into black JDM DC5 ITR seats (even though this will only lead to my car getting stolen even sooner) or looking into some Carbeau TRS seats. I am still torn on what seats to go with.

This project is taking me way longer than planned but I have been busy with a bunch of other things so I guess I will deal. I hope to have it up and running mid June.

Anyway, on with the pics!



http://discodordon.com/uploader/files/1/IMG00027-20090514-1753%281%29.jpg

http://discodordon.com/uploader/files/1/IMG00028-20090515-1133%281%29.jpg

http://discodordon.com/uploader/files/1/IMG00029-20090515-1225%281%29.jpg

http://discodordon.com/uploader/files/1/IMG00030-20090515-1418%281%29.jpg

http://discodordon.com/uploader/files/1/IMG00033-20090515-1742%281%29.jpg

http://discodordon.com/uploader/files/1/IMG00041-20090517-1604%281%29.jpg

http://discodordon.com/uploader/files/1/IMG00039-20090517-1537%281%29.jpg

http://discodordon.com/uploader/files/1/IMG00043-20090517-1715%281%29.jpg

http://discodordon.com/uploader/files/1/IMG00031-20090515-1720.jpg

http://discodordon.com/uploader/files/1/IMG00045-20090517-1720%281%29.jpg

[toyoter91]

Here is a pic of some of the swap parts.

http://discodordon.com/uploader/files/1/IMG00047-20090517-1725.jpg


I stumbled upon a TSX long block for really cheap and it turned out to be an 06 so I will be running those cams to start. I plan to have some custom cams ground once I get my head back from being ported, but that wont be for a while. I have some other plans for the “back up” block I will be parting together once I assemble the motor that will be going into it first.

[toyoter91]

I figured I would post up some random pics of other stuff I have been doing that seemed interesting lol.

http://discodordon.com/uploader/files/1/IMG00012-20090508-1247%281%29.jpg

http://discodordon.com/uploader/files/1/IMG00016-20090509-1522%281%29.jpg

http://discodordon.com/uploader/files/1/IMG00019-20090512-1116%281%29.jpg

http://discodordon.com/uploader/files/1/IMG00023-20090513-0046%281%29.jpg

http://discodordon.com/uploader/files/1/IMG00132-20090405-1535%281%29.jpg

http://discodordon.com/uploader/files/1/IMG00133-20090405-1540%281%29.jpg

http://discodordon.com/uploader/files/1/IMG00135-20090405-1545%281%29.jpg

http://discodordon.com/uploader/files/1/IMG00167-20090411-1901%281%29.jpg

http://discodordon.com/uploader/files/1/IMG00179-20090417-1424.jpg

http://discodordon.com/uploader/files/1/IMG00229-20090423-1415%281%29.jpg

http://discodordon.com/uploader/files/1/IMG00243-20090425-1027%281%29.jpg

[hybridracing]

AWESOME keep it up! What game was that high score? Do you work at Blueprint?

[TypeOne]

LOL Rockband?

[toyoter91]

AWESOME keep it up! What game was that high score? Do you work at Blueprint?

Haha dude its Robby from BluePrint. This is my personal screen name.


LOL Rockband?


hahaha I had not played in months, picked it up, pulled that. I figured someone would be entertained out of the random pics.

[JDMEK4COUPE]

Good Stuff!

[JDMEK4COUPE]

Any updates here?